|
Thermal Resistance of Enclosed Reflective Airspaces in Building Applications |
Apr 13, 2015 |
Hamed H. Saber |
|
Doing It Right the Second Time – Designing Minimally Invasive, Cost-Effective Solutions for Window Repair vs. Replacement |
Apr 13, 2015 |
David W. Boyer, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc., Lawrence, Kans, Ron Tatley, Building Envelope Analysis, LLC, Santa Rosa Beach, Florida, USA , Stacey Grund, Building Envelope Analysis, LLC, Seattle, Washington, USA Tatley-Grund, Inc., Seattle, Matthew Travis, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc. Lawrence, Kansa |
|
NFPA 285 in the Field: An Update of Local Adoption |
Apr 13, 2015 |
Keith Nelson, AIA, Intertek-ATI |
|
Importance of the Building Enclosure in Meeting Sustainable Building-Performance Goals |
Apr 13, 2015 |
H. Jay Enck |
|
State of the Art of NFPA 285 |
Apr 13, 2015 |
Brian Kuhn, Simpson Gumpertz & Heger Inc. |
|
Measuring Field Performance of Aerogel Insulation in a Hot, Dry Climate |
Apr 13, 2015 |
Bryan Urban, Fraunhofer Center for Sustainable Energy Systems, USA, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Anthony D. Fontanini, Iowa State University, USA , Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA |
|
Field Test Data from Retrofit of a Small Residential House Using EISF Technology |
Apr 13, 2015 |
John Edgar, STO Corporation, Ali Fallahi, Fraunhofer CSE, Alliston Watts, Fraunhofer CSE, Jan Kosny, Fraunhofer CSE, Linda Jeng, Dow Chemical |
|
The Reality of Quantifying Curtain Wall Spandrel Thermal Performance: 2D, 3D and Hotbox Testing |
Apr 13, 2015 |
Neil Norris, Larry Carbary, Stanley Yee, Patrick Roppel, Phillip Ciantar |
|
Building Enclosure Commissioning: Past, Present, and Future |
Apr 13, 2015 |
John A. Runkle, Intertek / Architectural Testing, Inc., York, PA, USA |
|
The Effects of #4 Surface Low-E Coatings on Fenestration Condensation Resistance |
Apr 13, 2015 |
Tracy G. Rogers, Quanex Building Products, Inc |
|
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths |
Apr 13, 2015 |
Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA |
|
Design Considerations for Climate Change |
Apr 13, 2015 |
Paul Totten, Vice President, WSP, Alexandra Connor, Project Associate, WSP |
|
The Future of Fenestration Rating |
Apr 13, 2015 |
William C. duPont, Syerngy Consulting |
|
Use of Thermal Inertia for Reduction of HVAC Energy Consumption in Cooling Dominated and Mixed Climates |
Apr 13, 2015 |
Jan Kośny, Fraunhofer CSE, Boston, MA, USA, Elizabeth Kossecka, Polish Academy Sciences, Warsaw, Poland, Ali Fallahi, Fraunhofer CSE, Boston, MA, USA, David Yarbrough, R&D Services, Inc., Cookeville, TN, USA |
|
Pressure Differences and Airtightness in Tall Buildings – Theory & Reality |
Apr 13, 2015 |
Lorne Ricketts, MASc, EIT., RDH Building Engineering Ltd., Vancouver, BC, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON |
|
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation |
Apr 13, 2015 |
Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada |
|
The Importance of Translating an OPR to BOD |
Apr 13, 2015 |
Andrew Smith, Senior Associate, WSP, Paul Totten, Vice President, WSP |
|
Introducing the BEST 4 Conference on Behalf of the Technical Committee |
Apr 13, 2015 |
Mark Bomberg, D. Sc. (Eng) , Techn. D, PE |
|
Performance of Sealed Curtain Wall Spandrel Panels that Direct Deep Sunlight into Multi-Story Buildings |
Apr 13, 2015 |
Radu Postole, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Neil Norris, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Kasra Bigdeli, Mechanical Engineer, SunCentral Inc, Richmond, BC |
|
Energy Efficient Retrofit of a High-Rise Multifamily Building |
Apr 13, 2015 |
Brittany Hanam, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, Lorne Ricketts, MASc, EIT, RDH Building Engineering Ltd., Vancouver, BC, Andrew Pape-Salmon, P.Eng., MRM, RDH Building Engineering Ltd., Victoria, BC |
|
Thermal and Hygrothermal Performance of Ventilated Attics With and Without Breathable Underlayments |
Apr 13, 2015 |
Sudhir Railkar, Ph.D. GAF, Adem Chich, GAF, Ming Shiaio, Ph.D., GAF, Andre Desjarlais, ORNL, William Miller, Ph.D. , ORNL |
|
Performance Testing for QA and Commissioning |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
|
Restoring Airtightness and Weather-Resistance to Window and Curtain Wall Systems |
Apr 13, 2015 |
Ed Retzbach, CSI, CDT, LEED AP BD+C |
|
Holistic Approach to Achieving Low Energy High-Rise Residential Buildings |
Apr 13, 2015 |
Christian Cianfrone, Building Energy Specialist, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Dieter Hardock, Product Manager, Schöck Bauteile GmbH, Baden-Baden, Germany |
|
A Critical Analysis of the Passive House Standard for the Climates of the United States |
Apr 13, 2015 |
Ryan M. Abendroth, Passive Energy Designs LLC, Saint Louis, MO |
