Foam Subscribe to Foam

Foam products are those constructed of polystyrene or polyurethane foam, usually as an insulation material.

Title Datesort ascending Author
Performance and Durability of Wall Assemblies using Mineral Wool Exterior Insulation in the Pacific Northwest Apr 16, 2018 Alejandra Nieto, building science project manager, ROXUL Inc.
Best Practice Recommendations for Interior Wall Retrofit for Masonry Construction May 01, 2016 Amy Wylie (Covestro), Andre Desjarlais (Oak Ridge National Lab), Mugdha Mokashi (ArchEcology)
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths Apr 13, 2015 Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation Apr 13, 2015 Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada
Field Monitoring of Cold Climate Double Stud Walls with Cellulose and Low-Density Foam Insulation Apr 13, 2015 Kohta Ueno, Senior Associate, Building Science Corporation, Westford, MA, Joseph W. Lstiburek, Ph.D., P.Eng., Principal, Building Science Corporation, Westford, MA
Field Test Data from Retrofit of a Small Residential House Using EISF Technology Apr 13, 2015 John Edgar, STO Corporation, Ali Fallahi, Fraunhofer CSE, Alliston Watts, Fraunhofer CSE, Jan Kosny, Fraunhofer CSE, Linda Jeng, Dow Chemical
Use of Thermal Inertia for Reduction of HVAC Energy Consumption in Cooling Dominated and Mixed Climates Apr 13, 2015 Jan Kośny, Fraunhofer CSE, Boston, MA, USA, Elizabeth Kossecka, Polish Academy Sciences, Warsaw, Poland, Ali Fallahi, Fraunhofer CSE, Boston, MA, USA, David Yarbrough, R&D Services, Inc., Cookeville, TN, USA
Fire Hazards of Exterior Wall Assemblies Containing Combustible Components Apr 13, 2015 Amanda Kimball, Fire Protection Research Foundation
State of the Art of NFPA 285 Apr 13, 2015 Brian Kuhn, Simpson Gumpertz & Heger Inc.
An Innovative Foam Insulation Produced from Cellulose Apr 02, 2012 Jae-Sik Kang (Korea Institute of Construction Technology), Gyeong-Seok Cho (Korea Institute of Construction Technology), Young-Cheol Kwon (Halla University)
Structural and Hygrothermal Field Monitoring of Thick Continuously Insulated Wall Assemblies Utilized in a Multistory Residential Building Apr 02, 2012 Gary Parsons (The Dow Chemical Company), Jeff Hansbro (The Dow Chemical Company), Craig Buck (The Dow Chemical Company), Scott Croasdale, M.Eng, P.Eng, PE (JRS Engineering Ltd.), Joel Schwartz, P.Eng, FEC, BEP (JRS Engineering Ltd.)
Simple, Fast, Cost Effective Methods of Foam Board Joint Sealing for Air Barrier Assemblies in Commercial Construction Apr 02, 2012 Katherine L. Johnson (The Dow Chemical Company), Daniel A. Tempas (The Dow Chemical Company)
Evaluation of the Thermal Performance of Innovative Pre-Fabricated Wall Systems through Field Testing Apr 02, 2012 Hua Ge (Ryerson University), Fitssum Tariku (British Columbia Institute of Technology)
Troubleshooting in Design of Construction Details, Walls Apr 12, 2010 Mark Lawton, P. Eng. (Morrison Hershfield Limited)
Airtightness Measurements of Wood Frame Low Energy Row Houses Apr 12, 2010 Sverre B. Holos (SINTEF), Thor-Oskar Relander (Norwegian University of Science and Technology)