Enclosure Subscribe to Enclosure

Enclosure systems refer to the "skin" of the building and may include roof, walls, and ground protection from air and water penetration.

Title Datesort ascending Author
Structural and Hygrothermal Field Monitoring of Thick Continuously Insulated Wall Assemblies Utilized in a Multistory Residential Building Apr 02, 2012 Gary Parsons (The Dow Chemical Company), Jeff Hansbro (The Dow Chemical Company), Craig Buck (The Dow Chemical Company), Scott Croasdale, M.Eng, P.Eng, PE (JRS Engineering Ltd.), Joel Schwartz, P.Eng, FEC, BEP (JRS Engineering Ltd.)
Single and Double Layered Vacuum Insulation Panels of the Same Thickness in Comparison Apr 02, 2012 Samuel Brunner (Empa - Swiss Federal Laboratories for Materials Science and Technology), T. Stahl (Empa - Swiss Federal Laboratories for Materials Science and Technology), Karim Ghazi Wakili (Empa - Swiss Federal Laboratories for Materials Science and Technology)
Retrofitting Timber Frame Walls with Vacuum Insulation Panels Apr 02, 2012 Erland Sveipe (Norwegian University of Science and Technology), Bjorn Petter Jelle (Norwegian University of Science and Technology), Sivert Uvsløkk (SINTEF Building and Infrastructure), Steinar Grynning (SINTEF Building and Infrastructure), Jan Vincent Thue (Norwegian University of Science and Technology), Berit Time (SINTEF Building and Infrastructure), Arild Gustavsen (Norwegian University of Science and Technology)
Simple, Fast, Cost Effective Methods of Foam Board Joint Sealing for Air Barrier Assemblies in Commercial Construction Apr 02, 2012 Katherine L. Johnson (The Dow Chemical Company), Daniel A. Tempas (The Dow Chemical Company)
Energy Savings by Retrofitting Multi-Unit Residential Buildings: Case Studies Apr 02, 2012 Marianne F. Touchie (University of Toronto), Kim D. Pressnail (University of Toronto), Ekaterina S. Tzekova (University of Toronto)
Joining the Pieces Together: A New Weatherbarrier Sealant to Ensure Energy Retention of Commercial Buildings Apr 02, 2012 Andrea Wagner (Dow Corning Corporation), Kelly Broker (Dow Corning Corporation)
Impacts of Operating Hardware on Window Thermal Performance Apr 02, 2012 Robert Hart (Lawrence Berkeley National Laboratory), Cezary Misiopecki (Norwegian University of Science and Technology), Arild Gustavsen (Norwegian University of Science and Technology), Bjørn Petter Jelle (SINTEF Building and Infrastructure/Norwegian University of Science), Dariush Arasteh (Lawrence Berkeley National Laboratory)
Envelope Thermal Failures Due to Wind Washing in Two-Story Homes Apr 02, 2012 James B. Cummings (Florida Solar Energy Center), Charles R. Withers (Florida Solar Energy Center)
Prototyping a Self-Ventilating Building Skin with Smart Thermobimetals Dec 01, 2011 Doris Kim Sung (University of Southern California)
Blast Safety of the Building Envelope Oct 19, 2011 Eve HInman, Hinman Consulting Engineers
BIM and the Building Envelope Oct 01, 2010 Will Ikerd, PE, CWI, LEED AP, Raymond L. Goodson Jr. Inc.
More Sustainable Masonry Façades: Preheating Ventilation Air Using a Dynamic Buffer Zone (DBZ) Apr 29, 2010 R.C. Richman (ryerson University), C. Cyanfrone (Morrison Hershfield Corp.), K.D. Pressnail (University of Toronto)
Applying Lessons from Clay-Brick Veneer to Design a Stucco Mix Apr 12, 2010 Marcin Pazera (Simpson, Gumperts and Heger), Mark Bomberg (Syracusse University)
Evaluating the Field Performance of Windows and Curtain Walls of Large Buildings Apr 12, 2010 Mario D. Goncalves (Patenaude-Trempe), Robert Jutra (Air-Ins)
Consideration for the Condensation Resistance of Fenestration Assemblies Apr 12, 2010 Tracy G. Rogers (Edgetech IG Inc.)
Airtightness Measurements of Wood Frame Low Energy Row Houses Apr 12, 2010 Sverre B. Holos (SINTEF), Thor-Oskar Relander (Norwegian University of Science and Technology)
Comparisons of Thermal Performance and Energy Consumption of Facades Used in Commercial Buildings Apr 12, 2010 Lawence D. Carbary (Dow Corning Corp.), Valerie Hayez (Dow Corning Corp.), Andreas Wolf (Dow Corning Corp.), Mahabir Bhandan (Dow Corning Corp.)
Air Barrier Assembly Testing to Replicate Real World Conditions Apr 12, 2010 Craig Boucher (W.R. Grace)
The Inherent Risk of Going Green Apr 12, 2010 Graham Davis (IBACOS, Inc.)
Successful Implementation of Air Tightness Requirements for Residential Buildings Apr 12, 2010 Bruce D. Nelson, PE (Minnesota Department of Commerce)
A New Paradigm for the Design of Sustainable Buildings Apr 12, 2010 Warren Knowles, P.Eng, Brian Hubbs, P.Eng, Paul Kernan, MAIBC, Graham Finch, MASc
Proposed Building Envelope Criteria for ASHRAE/IESNA Standard 90-1-2010 Apr 12, 2010 John F. Hogan, AIA, PE (Seattle Department of Planning and Development)
Eliminating the Potential for Air and Moisture Infiltration at the Window-Wall Interface Apr 12, 2010 Peter Poirier (Tremco Inc.), Brian Stroik (Oscar Boldt Construction)
Optimization of Net Zero Energy Houses Apr 12, 2010 Gary Proskiw, P. Eng (Proskiw Engineering Ltd.), Anil Parekh, P. Eng
A Method to Detect and Locate Roof Leaks Using Conductive Tapes Apr 12, 2010 David Vokey, P. Eng. (Detec Systems LLC)

Pages