|
Fire Hazards of Exterior Wall Assemblies Containing Combustible Components |
Apr 13, 2015 |
Amanda Kimball, Fire Protection Research Foundation |
|
Thermal Resistance of Enclosed Reflective Airspaces in Building Applications |
Apr 13, 2015 |
Hamed H. Saber |
|
Thermal Performance and Energy Savings Potential of Attic Radiant Barrier Systems |
Apr 13, 2015 |
Som Shrestha, PhD, BEMP, ORNL, Andre Desjarlais, ORNL |
|
A Detailed Study of Sunshades and their Effects on Performance |
Apr 13, 2015 |
Joe Fong, RA, NCARB, LEED AP (BD+C) Walter P. Moore |
|
State of the Art of NFPA 285 |
Apr 13, 2015 |
Brian Kuhn, Simpson Gumpertz & Heger Inc. |
|
Measuring Field Performance of Aerogel Insulation in a Hot, Dry Climate |
Apr 13, 2015 |
Bryan Urban, Fraunhofer Center for Sustainable Energy Systems, USA, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Anthony D. Fontanini, Iowa State University, USA , Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA |
|
Weathered OSB Air and Water Leakage Testing |
Apr 13, 2015 |
Paul Grahovac, PROSOCO |
|
Re-Glazing of All Glass Curtain-Wall Buildings |
Apr 13, 2015 |
Michael Aoki-Kramer, BA, JD LEED-AP, RDH Building Sciences Inc., Graham Finch, RDH Building Engineering Ltd , Brian Hubbs, RDH Building Engineering Ltd, Ed Thiessen, RDH Building Engineering Ltd , James Higgins, RDH Building Engineering Ltd |
|
Importance of the Building Enclosure in Meeting Sustainable Building-Performance Goals |
Apr 13, 2015 |
H. Jay Enck |
|
The Effects of #4 Surface Low-E Coatings on Fenestration Condensation Resistance |
Apr 13, 2015 |
Tracy G. Rogers, Quanex Building Products, Inc |
|
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths |
Apr 13, 2015 |
Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA |
|
Field Test Data from Retrofit of a Small Residential House Using EISF Technology |
Apr 13, 2015 |
John Edgar, STO Corporation, Ali Fallahi, Fraunhofer CSE, Alliston Watts, Fraunhofer CSE, Jan Kosny, Fraunhofer CSE, Linda Jeng, Dow Chemical |
|
Building Enclosure Commissioning: Past, Present, and Future |
Apr 13, 2015 |
John A. Runkle, Intertek / Architectural Testing, Inc., York, PA, USA |
|
Pressure Differences and Airtightness in Tall Buildings – Theory & Reality |
Apr 13, 2015 |
Lorne Ricketts, MASc, EIT., RDH Building Engineering Ltd., Vancouver, BC, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON |
|
Detailed Monitoring and Energy Model Development of an Existing Multi-Unit Residential Building in Toronto, Canada |
Apr 13, 2015 |
Marianne F. Touchie, Toronto Atmospheric Fund and University of Toronto, Toronto, ON, Kim D. Pressnail, University of Toronto, Toronto, ON |
|
Design Considerations for Climate Change |
Apr 13, 2015 |
Paul Totten, Vice President, WSP, Alexandra Connor, Project Associate, WSP |
|
Deterioration Model for Establishing an Optimal Mix of Time-Based Maint. and Condition-Based Maint. for the Enclosure System |
Apr 13, 2015 |
David Albrice, BSc., URP., ARP., PRA RDH Building Engineering Ltd., Matthew Branch, P.Eng. RDH Building Engineering Ltd. |
|
Use of Thermal Inertia for Reduction of HVAC Energy Consumption in Cooling Dominated and Mixed Climates |
Apr 13, 2015 |
Jan Kośny, Fraunhofer CSE, Boston, MA, USA, Elizabeth Kossecka, Polish Academy Sciences, Warsaw, Poland, Ali Fallahi, Fraunhofer CSE, Boston, MA, USA, David Yarbrough, R&D Services, Inc., Cookeville, TN, USA |
|
Energy Efficient Retrofit of a High-Rise Multifamily Building |
Apr 13, 2015 |
Brittany Hanam, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, Lorne Ricketts, MASc, EIT, RDH Building Engineering Ltd., Vancouver, BC, Andrew Pape-Salmon, P.Eng., MRM, RDH Building Engineering Ltd., Victoria, BC |
|
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation |
Apr 13, 2015 |
Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada |
|
The Importance of Translating an OPR to BOD |
Apr 13, 2015 |
Andrew Smith, Senior Associate, WSP, Paul Totten, Vice President, WSP |
|
Performance of Sealed Curtain Wall Spandrel Panels that Direct Deep Sunlight into Multi-Story Buildings |
Apr 13, 2015 |
Radu Postole, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Neil Norris, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Kasra Bigdeli, Mechanical Engineer, SunCentral Inc, Richmond, BC |
|
A Critical Analysis of the Passive House Standard for the Climates of the United States |
Apr 13, 2015 |
Ryan M. Abendroth, Passive Energy Designs LLC, Saint Louis, MO |
|
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes |
Apr 13, 2015 |
Kaushik Biswas, Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridg, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA, Ramin Abhari, Renewable Energy Group Synthetic Fuels, LLC (formerly Syntroleum), Tulsa, OK, USA |
|
Performance Testing for QA and Commissioning |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
