Enclosure Subscribe to Enclosure

Enclosure systems refer to the "skin" of the building and may include roof, walls, and ground protection from air and water penetration.

Titlesort ascending Date Author
Quality Management in the Design and Construction of Enclosure Systems Apr 02, 2012 Michael P. Steffen, AIA (Walsh Construction Co.), Martin J. Houston (Walsh Construction Co.)
Quality Control of Air Barriers During Construction Apr 02, 2012 Brandon S. Buchberg (Simpson Gumpertz & Heger Inc.), Jason S. Der Ananian (Simpson Gumpertz & Heger Inc.)
Prototyping a Self-Ventilating Building Skin with Smart Thermobimetals Dec 01, 2011 Doris Kim Sung (University of Southern California)
Proposed Building Envelope Criteria for ASHRAE/IESNA Standard 90-1-2010 Apr 12, 2010 John F. Hogan, AIA, PE (Seattle Department of Planning and Development)
Production Homebuilder + Passive House: Lessons Learned Apr 13, 2015 Anastasia Herk, IBACOS, Pittsburgh, PA, Duncan Prahl, IBACOS, Pittsburgh, PA
Print Tilt Lift – Concrete 3D Printing for Precast Assemblies Feb 11, 2020 Tsz Yan Ng (University of Michigan), Wes McGee (University of Michigan)
Pressure Differences and Airtightness in Tall Buildings – Theory & Reality Apr 13, 2015 Lorne Ricketts, MASc, EIT., RDH Building Engineering Ltd., Vancouver, BC, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON
Prefabricated Exterior Wall Panels for Commercial Building Enclosures Apr 16, 2018 Kenneth C. Loush, PE, Eastern Exterior Wall Systems, Inc
Practical Residential Wall Systems: R-30 and Beyond Apr 12, 2010 Robb A. Aldrich (Steven Winter Associates), Lois Arena (Steven WInter Associates), William Zoeller (steven Winter Associates)
Potential Energy Savings with Exterior Shades in Large Offce Buildings and the Impace of Discomfort Glare Apr 13, 2015 Sabine Hoffmann, Lawrence Berkeley National Laboratory, Eleanor Lee, Lawrence Berkeley National Laboratory
Physical or Virtual? : Effectiveness of Virtual Mockups of Building Envelope Systems Apr 02, 2012 Minjung Maing (Georgia Institute of Technology)
Performance-Risk Analysis For the Design of High-Performance Affordable Homes Apr 02, 2012 Rodrigo Mora (British Columbia Institute of Technology), Fitsum Tariku (British Columbia Institute of Technology), Girma Bitsuamlak (Florida International University)
Performance Validation Case Study--Federal Office Building with an Integrated Facade Apr 13, 2015 Mark Perepelitza, AIA, LEED AP BD+C, SERA Architects, Sustainability Resources Group Manager., Lisa Petterson, AIA, LEED AP BD+C, Associate Principal, SERA Architects, Sustainability Resources Gr, Kate Turpin, PE, LEED AP BD+C , Associate, SERA Architects, Integrated Design Specialist, James Riley, LEED AP BD+C, Associate, SERA Architects, Project Architect
Performance Testing for Quality Assurance and Commissioning Apr 13, 2015 Fiona Aldous, principal, WJE
Performance of Sealed Curtain Wall Spandrel Panels that Direct Deep Sunlight into Multi-Story Buildings Apr 13, 2015 Radu Postole, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Neil Norris, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Kasra Bigdeli, Mechanical Engineer, SunCentral Inc, Richmond, BC
Performance of Glass FIber Lath as a Plaster Base with Exterior Cement Plaster (Stucco) Apr 10, 2010 William F. Egan (BASF Construction Chemicals, LLC), Eric Auman (BASF Construction Chemicals, LLC)
Performance and Durability of Wall Assemblies using Mineral Wool Exterior Insulation in the Pacific Northwest Apr 16, 2018 Alejandra Nieto, building science project manager, ROXUL Inc.
Osmosis and the Blistering of Polyurethane Waterproofing Membranes Apr 12, 2010 Graham Finch, MASc (RDH Building Engineering Ltd.), Brian Hubbs, P.Eng, (RDH Building Engineering Ltd.), Robert Bombino, MS, PE (RDH Building Sciences)
OSB Sheathing with Integral Water-Resistive Barriers Apr 10, 2010 Thomas Thorsell (Syracuse University), Mark Bomberg (Syracusse University)
Optimization of Net Zero Energy Houses Apr 12, 2010 Gary Proskiw, P. Eng (Proskiw Engineering Ltd.), Anil Parekh, P. Eng
One Fold (2014 R+D Award) Jul 31, 2014
One and Two Potomac Yard : A Whole Building Design Guide Case Study Nov 23, 2016 Whole Building Design Guide, a program of the National Institute of Building Sciences
North American Way For Passive House-Based Near Zero Energy Buildings Apr 13, 2015 Katrin Klingenberg, Passive Solar House Institute-US
NFPA 285 in the Field: An Update of Local Adoption Apr 13, 2015 Keith Nelson, AIA, Intertek-ATI
Net Zero Energy Housing - Lessons Learned Apr 02, 2012 Gary Proskiw (Proskiw Engineering Ltd.), Alex Ferguson (Natural Resources Canada)

Pages