Enclosure 
Enclosure systems refer to the "skin" of the building and may include roof, walls, and ground protection from air and water penetration.
| Title |
Date |
Author |
|---|---|---|
| High Performance Curtain Wall Using Vacuum Insulated Panel (VIP) Spandrels | Apr 02, 2012 | Lawrence D. Carbary (Dow Corning Corporation), Andrew Dunlap, AIA (SmithGroup), Thomas F. O’Connor, FAIA (SmithGroup) |
| Towards Airtightness – The Contractor’s Role in Designing and Constructing the Air Barrier System | Apr 02, 2012 | Michael P. Steffen, AIA (Walsh Construction Co.) |
| Electronically Tintable Glass as an Architectural Enabler | Apr 02, 2012 | Helen Sanders, PhD (SAGE Electrochromics, Inc.), Louis Podbelski, AIA (SAGE Electrochromics, Inc.) |
| Exploring the Building Energy Impacts of Green Roof Design Decisions - A Modeling Study of Buildings in Four Distinct Climates | Apr 02, 2012 | David J. Sailor (Portland State University), Timothy B. Elley (PAE Consulting Engineers), Max Gibson (Portland State University) |
| Very High Performance Glazing In Traditional Framing | Apr 02, 2012 | Christopher J. Barry (Pilkington NA Inc.) |
| Learning from Exterior Wall Problems | Apr 02, 2012 | Joseph P. Solinski (Stone & Glazing Consulting) |
| Performance-Risk Analysis For the Design of High-Performance Affordable Homes | Apr 02, 2012 | Rodrigo Mora (British Columbia Institute of Technology), Fitsum Tariku (British Columbia Institute of Technology), Girma Bitsuamlak (Florida International University) |
| Net Zero Energy Housing - Lessons Learned | Apr 02, 2012 | Gary Proskiw (Proskiw Engineering Ltd.), Alex Ferguson (Natural Resources Canada) |
| Masonry Wall Interior Insulation Retrofit Embedded Beam Simulations | Apr 02, 2012 | Kohta Ueno (Building Science Corporation) |
| Eliminating the Potential for Air and Moisture Infiltration in Stucco Facades at the Window-Wall Interface | Apr 02, 2012 | Peter Poirier (Tremco Building Envelope Solutions), Bill Hooper (Kawneer Company, Inc.) |
| Innovative High Performance Thermal Building Insulation Materials - Todays State-of-the-Art and Beyond Tomorrow | Apr 02, 2012 | Bjørn Petter Jelle (SINTEF Department of Matierials and Structure), Arild Gustavsen (Norwegian University of Science and Technology), Ruben Baetens (Catholic University of Leuven) |
| Informed Mechanical Design Through Tested Air Leakage Rates | Apr 02, 2012 | Jeff Speert, AIA (JRS Engineering Corp.), Cory Legge, AScT (JRS Engineering Ltd.) |
| The Concept of Linear and Point Transmittance and its Value in Dealing with Thermal Bridges in Building Enclosures | Apr 02, 2012 | Neil Norris (Morrison Hershfield), Mark Lawton (Morrison Hershfield), Patrick Roppel (Morrison Hershfield) |
| Energy Performance Analysis of Building Envelopes Utilizing Blown Fiber Insulation with Microencapsulated Phase Change Material (PCM) | Apr 02, 2012 | E. Kossecka (Institute of Fundamental Technological Research of the Polish Academy of Sciences), J. Kośny (Fraunhofer Center for Sustainable Energy Systems), D. W. Yarbrough (R&D Services) |
| Building Enclosure Performance Research— Applications in Professional Practice | Apr 02, 2012 | Mark Perepelitza, AIA (ZGF Architects) |
| Boundary Conditions for Water Tightness Testing Based on Pareto-Front Analysis | Apr 02, 2012 | Nathan Van Den Bossche (Ghent University), Michael A. Lacasse (NRC-CNRC), Arnold Janssens (Ghent University) |
| Thermal Insulation Systems of the Future | Apr 02, 2012 | Mark Bomberg (University of Toronto), Marcin Pazera (CENTRIA), Robert Aird (Robert Aird Inc.) |
| Physical or Virtual? : Effectiveness of Virtual Mockups of Building Envelope Systems | Apr 02, 2012 | Minjung Maing (Georgia Institute of Technology) |
| Water Infiltration through Openings in a Vertical Plane Under Static and Dynamic Pressure Conditions | Apr 02, 2012 | Michael A. Lacasse (National Research Council Canada), Nathan Van Den Bossche (Ghent University), Travis Moore (National Research Council Canada) |
| The Role of the Building Façade – Curtain Walls | Apr 02, 2012 | Dudley McFarquhar, PhD, PE (McFarquhar Group Inc.) |
| Quality Management in the Design and Construction of Enclosure Systems | Apr 02, 2012 | Michael P. Steffen, AIA (Walsh Construction Co.), Martin J. Houston (Walsh Construction Co.) |
| Implementation of Quality Assurance Programs for the Exterior Building Envelope through the Design Process | Apr 02, 2012 | Paul G. Johnson, FAIA, NCARB (SmithGroupJJR Building Technology Studio) |
| Building Enclosure Commissioning of a Student Athletic Facility | Apr 02, 2012 | Paul E. Totten, PE (Simpson Gumpertz & Heger Inc.), Andrew Smith (Simpson Gumpertz & Heger Inc.) |
| Assessing Thermal Comfort near Glass Facades with New Tools | Apr 02, 2012 | Sabine Hoffmann (Center for the Built Environment, University of California at Berkeley), Christoph Jedek (Center for the Built Environment, University of California at Berkeley), Edward Arens (Center for the Built Environment, University of California at Berkeley) |
| Guidelines for the Practice of Building Enclosure Engineering | Apr 02, 2012 | Mark Lawton, P.Eng. (Morrison Hershfield Ltd.), David Ricketts, P.Eng (RDH Building Engineering Ltd.) |