|
Emergent Materials for Security, Energy and the Environment |
Dec 01, 2011 |
Blaine Brownell (University of Minnesota School of Architecture) |
|
Performance Driven Design and Prototyping: Design Computation and Fabrication |
Dec 06, 2011 |
Ming Tang, LEED AP BD+C (University of Cincinnati), Ajla Aksamija, PhD, LEED AP BD+C, CDT (Perkins+Will), Michael Hodge, MARCH, AIAA, ACADIA (Perkins+Will), Jonathon Anderson, MFA, ACADIA, IDEC (University of North Carolina Greensboro) |
|
Frost Damage of Roof Tiles in Relatively Warm Areas in Japan: Influence of Surface Finish on Water Penetration |
Apr 02, 2012 |
Chiemi Iba (Hokkaido Research Organization), Shuichi Hokoi (Kyoto University) |
|
Sloped Glazing: Problems and Solutions |
Apr 02, 2012 |
Karol Kazmierczak, AIA (Building Enclosure Consulting LLC) |
|
Retrofitting Timber Frame Walls with Vacuum Insulation Panels |
Apr 02, 2012 |
Erland Sveipe (Norwegian University of Science and Technology), Bjorn Petter Jelle (Norwegian University of Science and Technology), Sivert Uvsløkk (SINTEF Building and Infrastructure), Steinar Grynning (SINTEF Building and Infrastructure), Jan Vincent Thue (Norwegian University of Science and Technology), Berit Time (SINTEF Building and Infrastructure), Arild Gustavsen (Norwegian University of Science and Technology) |
|
Learning from Exterior Wall Problems |
Apr 02, 2012 |
Joseph P. Solinski (Stone & Glazing Consulting) |
|
Joining the Pieces Together: A New Weatherbarrier Sealant to Ensure Energy Retention of Commercial Buildings |
Apr 02, 2012 |
Andrea Wagner (Dow Corning Corporation), Kelly Broker (Dow Corning Corporation) |
|
Eliminating the Potential for Air and Moisture Infiltration in Stucco Facades at the Window-Wall Interface |
Apr 02, 2012 |
Peter Poirier (Tremco Building Envelope Solutions), Bill Hooper (Kawneer Company, Inc.) |
|
How the Current Sustainability Movement Impacts the Enclosure: A Look at the VanDusen Botanical Garden Visitors Centre |
Apr 02, 2012 |
Catherine Lemieux, P.Eng. (Morrison Hershfield Ltd.) |
|
Assessing Thermal Comfort near Glass Facades with New Tools |
Apr 02, 2012 |
Sabine Hoffmann (Center for the Built Environment, University of California at Berkeley), Christoph Jedek (Center for the Built Environment, University of California at Berkeley), Edward Arens (Center for the Built Environment, University of California at Berkeley) |
|
Dynamic Exterior Wall Systems for Solid Masonry Walls in Humidified Buildings |
Apr 02, 2012 |
Sean O'Brien, PE (Simpson Gumpertz & Heger Inc.), Vince Cammalleri, AIA (Simpson Gumpertz & Heger Inc.) |
|
Single and Double Layered Vacuum Insulation Panels of the Same Thickness in Comparison |
Apr 02, 2012 |
Samuel Brunner (Empa - Swiss Federal Laboratories for Materials Science and Technology), T. Stahl (Empa - Swiss Federal Laboratories for Materials Science and Technology), Karim Ghazi Wakili (Empa - Swiss Federal Laboratories for Materials Science and Technology) |
|
Quality Control of Air Barriers During Construction |
Apr 02, 2012 |
Brandon S. Buchberg (Simpson Gumpertz & Heger Inc.), Jason S. Der Ananian (Simpson Gumpertz & Heger Inc.) |
|
Energy Savings by Retrofitting Multi-Unit Residential Buildings: Case Studies |
Apr 02, 2012 |
Marianne F. Touchie (University of Toronto), Kim D. Pressnail (University of Toronto), Ekaterina S. Tzekova (University of Toronto) |
|
Electronically Tintable Glass as an Architectural Enabler |
Apr 02, 2012 |
Helen Sanders, PhD (SAGE Electrochromics, Inc.), Louis Podbelski, AIA (SAGE Electrochromics, Inc.) |
|
Simulation of Dynamic Daylighting and Glare Control Systems for a Six-Story Net Zero Energy Office Building in Seattle, WA |
Apr 02, 2012 |
Christopher Meek (University of Washington), Amanda Bruot (University of Washington), Louie Caldwell (University of Washington) |
|
Very High Performance Glazing In Traditional Framing |
Apr 02, 2012 |
Christopher J. Barry (Pilkington NA Inc.) |
|
Evaluation of the Thermal Performance of Innovative Pre-Fabricated Wall Systems through Field Testing |
Apr 02, 2012 |
Hua Ge (Ryerson University), Fitssum Tariku (British Columbia Institute of Technology) |
|
Masonry Wall Interior Insulation Retrofit Embedded Beam Simulations |
Apr 02, 2012 |
Kohta Ueno (Building Science Corporation) |
|
Solar Reflectivity Studies Lotte World Tower – Case Study |
Apr 02, 2012 |
Charles D. Clift, PE (Curtain Wall Design and Consulting), Vicente Montes-Amoros, PE (Curtain Wall Design and Consulting) |
|
Building Enclosure Performance Research— Applications in Professional Practice |
Apr 02, 2012 |
Mark Perepelitza, AIA (ZGF Architects) |
|
Aerogel for Thermal Insulation of Interior Wall Retrofits in Cold Climates |
Apr 02, 2012 |
Nitin C. Shukla (Fraunhofer Center for Sustainable Energy Systems), Ali Fallahi (Fraunhofer Center for Sustainable Energy Systems), Jan Kosny (Fraunhofer Center for Sustainable Energy Systems), Steve Harasim (Aspen Aerogels Inc.), Chris Blair (Aspen Aerogels Inc.) |
|
Structural and Hygrothermal Field Monitoring of Thick Continuously Insulated Wall Assemblies Utilized in a Multistory Residential Building |
Apr 02, 2012 |
Gary Parsons (The Dow Chemical Company), Jeff Hansbro (The Dow Chemical Company), Craig Buck (The Dow Chemical Company), Scott Croasdale, M.Eng, P.Eng, PE (JRS Engineering Ltd.), Joel Schwartz, P.Eng, FEC, BEP (JRS Engineering Ltd.) |
|
Towards Airtightness – The Contractor’s Role in Designing and Constructing the Air Barrier System |
Apr 02, 2012 |
Michael P. Steffen, AIA (Walsh Construction Co.) |
|
Simple, Fast, Cost Effective Methods of Foam Board Joint Sealing for Air Barrier Assemblies in Commercial Construction |
Apr 02, 2012 |
Katherine L. Johnson (The Dow Chemical Company), Daniel A. Tempas (The Dow Chemical Company) |
