Enclosure Subscribe to Enclosure

Enclosure systems refer to the "skin" of the building and may include roof, walls, and ground protection from air and water penetration.

Titlesort descending Date Author
Drainage Capabilities and Heat Loss of Different Inverted Roofs Assemblies Apr 16, 2018 Matthew Pel, B.Tech., Eng.L., Building Science Consultant and Principal, Morrison Hershfield, Derek Budde B.Sc. EIT, Building Science Consultant and Principal, Morrison Hershfield
Durability of Water-Resistive Barriers as a Factor in Litigation Apr 16, 2018 David Nicastro, CEO, Building Diagnostics
Dynamic Composite Cladding May 13, 2015 Jefferson Ellinger (University of North Carolina, Charlotte)
Dynamic Exterior Wall Systems for Solid Masonry Walls in Humidified Buildings Apr 02, 2012 Sean O'Brien, PE (Simpson Gumpertz & Heger Inc.), Vince Cammalleri, AIA (Simpson Gumpertz & Heger Inc.)
Dynamic Façades: Solving the High Performance Building Challenge without Design Compromise Apr 13, 2015 Helen E Sanders, Vice President, Technical Business Development, SAGE Electrochromics, Inc., Fariba, Louis Podbelski, Vice President, Architectural Solutions, SAGE Electrochromics, Inc., Faribault, MN
Early Phase Performance Modeling to Right-Size Building Enclosure Apr 13, 2015 Jillian Burgess, RA. The Facade Group, Philadelphia, PA
Effect of Aging on Service Life of Vacuum Insulation Panels Apr 12, 2010 Erlend Wegger (Norway University of Science and Technology (NTNU)), Bjørn Petter Jelle (Norway University of Science and Technology (NTNU)), Erland Sveipe (Norway University of Science and Technology (NTNU)), Steinar Grynning (Norway University of Science and Technology (NTNU)), Ruben Baetens (Norway University of Science and Technology (NTNU)), Jan Vincent Thue (Norway University of Science and Technology (NTNU))
Electronically Tintable Glass as an Architectural Enabler Apr 02, 2012 Helen Sanders, PhD (SAGE Electrochromics, Inc.), Louis Podbelski, AIA (SAGE Electrochromics, Inc.)
Electronically Tintable Glass: The Future of High Performance Facades is Here Apr 12, 2010 Helen Sanders, PhD (Sage Electrochromics Inc.), Lou Podbelski, AIA )Sage Electrochromics Inc.)
Eliminating the Potential for Air and Moisture Infiltration at the Window-Wall Interface Apr 12, 2010 Peter Poirier (Tremco Inc.), Brian Stroik (Oscar Boldt Construction)
Eliminating the Potential for Air and Moisture Infiltration in Stucco Facades at the Window-Wall Interface Apr 02, 2012 Peter Poirier (Tremco Building Envelope Solutions), Bill Hooper (Kawneer Company, Inc.)
Energy Challenges Related to Recladding Early Model Curtain Walls Apr 13, 2015 Andrew A. Dunlap, AIA, SmithGroupJJR, Building Technology Studio; Detroit, MI
Energy Codes: Challenges with Existing Buildings Apr 01, 2014 Bradley T. Carmichael, PE, Hoffmann Architects
Energy Consumption in Mid and High Rise Residential Buildings in British Columbia Apr 12, 2010 Graham Finch, MASc (RDH Building Engineering Ltd.), Eric Burnett, PhD (RDH Building Engineering Ltd.), Warren Knowles, P.Eng (RDH Building Engineering Ltd.)
Energy Efficient Architectural Design Strategies in Hot‐Dry Area of Iran: Kashan Apr 12, 2010 Kamyar Tolou Behbood (Faculty of Architecture, University of Tehran), Mohammad Taleghani (Faculty of Architecture, University of Tehran), Shahin Heidari (Faculty of Architecture, University of Tehran)
Energy Efficient or Healthy Buildings? How Dynamic Glazing Eliminates the Need to Choose. Apr 16, 2018 Ryan Park, Global Head of Marketing and Product Management, SAGE Electrochromics, Inc. , Maure Creager, Building Science Manger, SAGE Electrochromics, Inc
Energy Efficient Retrofit of a High-Rise Multifamily Building Apr 13, 2015 Brittany Hanam, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, Lorne Ricketts, MASc, EIT, RDH Building Engineering Ltd., Vancouver, BC, Andrew Pape-Salmon, P.Eng., MRM, RDH Building Engineering Ltd., Victoria, BC
Energy Performance Analysis of Building Envelopes Utilizing Blown Fiber Insulation with Microencapsulated Phase Change Material (PCM) Apr 02, 2012 E. Kossecka (Institute of Fundamental Technological Research of the Polish Academy of Sciences), J. Kośny (Fraunhofer Center for Sustainable Energy Systems), D. W. Yarbrough (R&D Services)
Energy Performance of Different Types of Double Skin Facades in Various Climates Jun 14, 2017 Ajla Aksamija, PhD, LEED AP BD+C, CDT (University of Massachusetts Amherst)
Energy Savings by Retrofitting Multi-Unit Residential Buildings: Case Studies Apr 02, 2012 Marianne F. Touchie (University of Toronto), Kim D. Pressnail (University of Toronto), Ekaterina S. Tzekova (University of Toronto)
Envelope Thermal Failures Due to Wind Washing in Two-Story Homes Apr 02, 2012 James B. Cummings (Florida Solar Energy Center), Charles R. Withers (Florida Solar Energy Center)
Evaluating R-40 Above Grade Walls for a Production Built Zero Apr 12, 2010 John Broniek (IBACOS), Kevin Brozyna (IBACOS), Dave Stecher (IBACOS)
Evaluating the Field Performance of Windows and Curtain Walls of Large Buildings Apr 12, 2010 Mario D. Goncalves (Patenaude-Trempe), Robert Jutra (Air-Ins)
Evaluation of the Thermal Performance of Innovative Pre-Fabricated Wall Systems through Field Testing Apr 02, 2012 Hua Ge (Ryerson University), Fitssum Tariku (British Columbia Institute of Technology)
Evolving Ice Damming Solutions for a Changing Climate Apr 16, 2018 Charlotte Metzler, Assoc. AIA, building enclosure consultant, WSP

Pages