Enclosure Subscribe to Enclosure

Enclosure systems refer to the "skin" of the building and may include roof, walls, and ground protection from air and water penetration.

Title Datesort descending Author
Doing It Right the Second Time – Designing Minimally Invasive, Cost-Effective Solutions for Window Repair vs. Replacement Apr 13, 2015 David W. Boyer, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc., Lawrence, Kans, Ron Tatley, Building Envelope Analysis, LLC, Santa Rosa Beach, Florida, USA , Stacey Grund, Building Envelope Analysis, LLC, Seattle, Washington, USA Tatley-Grund, Inc., Seattle, Matthew Travis, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc. Lawrence, Kansa
The Effects of #4 Surface Low-E Coatings on Fenestration Condensation Resistance Apr 13, 2015 Tracy G. Rogers, Quanex Building Products, Inc
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths Apr 13, 2015 Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA
Field Test Data from Retrofit of a Small Residential House Using EISF Technology Apr 13, 2015 John Edgar, STO Corporation, Ali Fallahi, Fraunhofer CSE, Alliston Watts, Fraunhofer CSE, Jan Kosny, Fraunhofer CSE, Linda Jeng, Dow Chemical
Pressure Differences and Airtightness in Tall Buildings – Theory & Reality Apr 13, 2015 Lorne Ricketts, MASc, EIT., RDH Building Engineering Ltd., Vancouver, BC, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON
Detailed Monitoring and Energy Model Development of an Existing Multi-Unit Residential Building in Toronto, Canada Apr 13, 2015 Marianne F. Touchie, Toronto Atmospheric Fund and University of Toronto, Toronto, ON, Kim D. Pressnail, University of Toronto, Toronto, ON
Design Considerations for Climate Change Apr 13, 2015 Paul Totten, Vice President, WSP, Alexandra Connor, Project Associate, WSP
NFPA 285 in the Field: An Update of Local Adoption Apr 13, 2015 Keith Nelson, AIA, Intertek-ATI
Energy Efficient Retrofit of a High-Rise Multifamily Building Apr 13, 2015 Brittany Hanam, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, Lorne Ricketts, MASc, EIT, RDH Building Engineering Ltd., Vancouver, BC, Andrew Pape-Salmon, P.Eng., MRM, RDH Building Engineering Ltd., Victoria, BC
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation Apr 13, 2015 Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada
Performance Testing for Quality Assurance and Commissioning Apr 13, 2015 Fiona Aldous, principal, WJE
The Reality of Quantifying Curtain Wall Spandrel Thermal Performance: 2D, 3D and Hotbox Testing Apr 13, 2015 Neil Norris, Larry Carbary, Stanley Yee, Patrick Roppel, Phillip Ciantar
A Critical Analysis of the Passive House Standard for the Climates of the United States Apr 13, 2015 Ryan M. Abendroth, Passive Energy Designs LLC, Saint Louis, MO
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes Apr 13, 2015 Kaushik Biswas, Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridg, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA, Ramin Abhari, Renewable Energy Group Synthetic Fuels, LLC (formerly Syntroleum), Tulsa, OK, USA
Building Enclosure Commissioning Education Apr 13, 2015 Wagdy Anis, FAIA, LEED AP, Anis Building Enclosure Consulting
The Future of Fenestration Rating Apr 13, 2015 William C. duPont, Syerngy Consulting
Use of Thermal Inertia for Reduction of HVAC Energy Consumption in Cooling Dominated and Mixed Climates Apr 13, 2015 Jan Kośny, Fraunhofer CSE, Boston, MA, USA, Elizabeth Kossecka, Polish Academy Sciences, Warsaw, Poland, Ali Fallahi, Fraunhofer CSE, Boston, MA, USA, David Yarbrough, R&D Services, Inc., Cookeville, TN, USA
Case Study: Passive House Construction in Kansas City Apr 13, 2015 David Hawkins, Prairie Design build, David Schleicher, Prairie Design Build
Thermal and Hygrothermal Performance of Ventilated Attics With and Without Breathable Underlayments Apr 13, 2015 Sudhir Railkar, Ph.D. GAF, Adem Chich, GAF, Ming Shiaio, Ph.D., GAF, Andre Desjarlais, ORNL, William Miller, Ph.D. , ORNL
Five Not So Easy Pieces: Designing and Constructing the Passive House Enclosure Apr 13, 2015 Mike Steffen, Walsh Construction Co.
Keeping Energy Confined and Making Information Flow: The Smart Building of Tomorrow Apr 13, 2015 Christian Hoepfner, PhD, Director, Fraunhofer Center for Sustainable Energy Systems
Performance of Sealed Curtain Wall Spandrel Panels that Direct Deep Sunlight into Multi-Story Buildings Apr 13, 2015 Radu Postole, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Neil Norris, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Kasra Bigdeli, Mechanical Engineer, SunCentral Inc, Richmond, BC
North American Way For Passive House-Based Near Zero Energy Buildings Apr 13, 2015 Katrin Klingenberg, Passive Solar House Institute-US
The Role of High-Complexity Low-Resolution (HCLR) Performance Modeling in the Development of Dynamic Building Envelopes Apr 13, 2015 TIm Frank, Assistant Professor, Department of Architecture, SPSU , Chip Clark, Research Assistant Professor, School of Architecture + Design, Virginia Tech
Airflow in Mid to High-rise Multi-Unit Residential Buildings Apr 13, 2015 Lorne Ricketts, MASC, RDH Building Engineering LTD., Vancouver, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON

Pages