|
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths |
Apr 13, 2015 |
Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA |
|
Doing It Right the Second Time – Designing Minimally Invasive, Cost-Effective Solutions for Window Repair vs. Replacement |
Apr 13, 2015 |
David W. Boyer, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc., Lawrence, Kans, Ron Tatley, Building Envelope Analysis, LLC, Santa Rosa Beach, Florida, USA , Stacey Grund, Building Envelope Analysis, LLC, Seattle, Washington, USA Tatley-Grund, Inc., Seattle, Matthew Travis, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc. Lawrence, Kansa |
|
NFPA 285 in the Field: An Update of Local Adoption |
Apr 13, 2015 |
Keith Nelson, AIA, Intertek-ATI |
|
Performance of Sealed Curtain Wall Spandrel Panels that Direct Deep Sunlight into Multi-Story Buildings |
Apr 13, 2015 |
Radu Postole, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Neil Norris, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Kasra Bigdeli, Mechanical Engineer, SunCentral Inc, Richmond, BC |
|
Pressure Differences and Airtightness in Tall Buildings – Theory & Reality |
Apr 13, 2015 |
Lorne Ricketts, MASc, EIT., RDH Building Engineering Ltd., Vancouver, BC, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON |
|
Detailed Monitoring and Energy Model Development of an Existing Multi-Unit Residential Building in Toronto, Canada |
Apr 13, 2015 |
Marianne F. Touchie, Toronto Atmospheric Fund and University of Toronto, Toronto, ON, Kim D. Pressnail, University of Toronto, Toronto, ON |
|
Field Test Data from Retrofit of a Small Residential House Using EISF Technology |
Apr 13, 2015 |
John Edgar, STO Corporation, Ali Fallahi, Fraunhofer CSE, Alliston Watts, Fraunhofer CSE, Jan Kosny, Fraunhofer CSE, Linda Jeng, Dow Chemical |
|
The Reality of Quantifying Curtain Wall Spandrel Thermal Performance: 2D, 3D and Hotbox Testing |
Apr 13, 2015 |
Neil Norris, Larry Carbary, Stanley Yee, Patrick Roppel, Phillip Ciantar |
|
Holistic Approach to Achieving Low Energy High-Rise Residential Buildings |
Apr 13, 2015 |
Christian Cianfrone, Building Energy Specialist, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Dieter Hardock, Product Manager, Schöck Bauteile GmbH, Baden-Baden, Germany |
|
Energy Efficient Retrofit of a High-Rise Multifamily Building |
Apr 13, 2015 |
Brittany Hanam, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, Lorne Ricketts, MASc, EIT, RDH Building Engineering Ltd., Vancouver, BC, Andrew Pape-Salmon, P.Eng., MRM, RDH Building Engineering Ltd., Victoria, BC |
|
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation |
Apr 13, 2015 |
Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada |
|
Design Considerations for Climate Change |
Apr 13, 2015 |
Paul Totten, Vice President, WSP, Alexandra Connor, Project Associate, WSP |
|
The Future of Fenestration Rating |
Apr 13, 2015 |
William C. duPont, Syerngy Consulting |
|
Graywater Wetland Treatment for a Living Building |
Apr 13, 2015 |
Phillip L. Thompson, Seattle University, Seattle, WA. |
|
A Critical Analysis of the Passive House Standard for the Climates of the United States |
Apr 13, 2015 |
Ryan M. Abendroth, Passive Energy Designs LLC, Saint Louis, MO |
|
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes |
Apr 13, 2015 |
Kaushik Biswas, Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridg, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA, Ramin Abhari, Renewable Energy Group Synthetic Fuels, LLC (formerly Syntroleum), Tulsa, OK, USA |
|
The Importance of Translating an OPR to BOD |
Apr 13, 2015 |
Andrew Smith, Senior Associate, WSP, Paul Totten, Vice President, WSP |
|
Introducing the BEST 4 Conference on Behalf of the Technical Committee |
Apr 13, 2015 |
Mark Bomberg, D. Sc. (Eng) , Techn. D, PE |
|
The Bullitt Center Experience: Modeling and Measuring Net Zero Energy |
Apr 13, 2015 |
Marc Brune, PE, PAE Consulting Engineers, Portland, OR, Justin Stenkamp, PE, PAE Consulting Engineers, Seattle WA |
|
Case Study: Passive House Construction in Kansas City |
Apr 13, 2015 |
David Hawkins, Prairie Design build, David Schleicher, Prairie Design Build |
|
Thermal and Hygrothermal Performance of Ventilated Attics With and Without Breathable Underlayments |
Apr 13, 2015 |
Sudhir Railkar, Ph.D. GAF, Adem Chich, GAF, Ming Shiaio, Ph.D., GAF, Andre Desjarlais, ORNL, William Miller, Ph.D. , ORNL |
|
Performance Testing for QA and Commissioning |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
|
Keeping Energy Confined and Making Information Flow: The Smart Building of Tomorrow |
Apr 13, 2015 |
Christian Hoepfner, PhD, Director, Fraunhofer Center for Sustainable Energy Systems |
|
The Bullitt Center Experience: The Light Dynamic -- Measured Performance of Lighting and Daylight |
Apr 13, 2015 |
Christopher Meek, University of Washington, Seattle, Michael Gilbride, University of Washington, Seattle, Heli Ojaama, University of Washington, Seattle, Weston Norwood, University of Washington, Seattle |
|
North American Way For Passive House-Based Near Zero Energy Buildings |
Apr 13, 2015 |
Katrin Klingenberg, Passive Solar House Institute-US |
