|
Project profile: CANMET Materials Technology Laboratory |
Apr 22, 2015 |
AIA Committee on the Environment (COTE) |
|
Project profile: Collaborative Life Sciences Building for OHSU, PSU & OSU |
Apr 22, 2015 |
AIA Committee on the Environment (COTE) |
|
Project profile: E+ // 226-232 Highland Street Townhouses |
Apr 22, 2015 |
AIA Committee on the Environment (COTE) |
|
Project profile: Hughes Warehouse Adaptive Reuse |
Apr 22, 2015 |
AIA Committee on the Environment (COTE) |
|
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation |
Apr 13, 2015 |
Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada |
|
Design Considerations for Climate Change |
Apr 13, 2015 |
Paul Totten, Vice President, WSP, Alexandra Connor, Project Associate, WSP |
|
The Future of Fenestration Rating |
Apr 13, 2015 |
William C. duPont, Syerngy Consulting |
|
Graywater Wetland Treatment for a Living Building |
Apr 13, 2015 |
Phillip L. Thompson, Seattle University, Seattle, WA. |
|
A Critical Analysis of the Passive House Standard for the Climates of the United States |
Apr 13, 2015 |
Ryan M. Abendroth, Passive Energy Designs LLC, Saint Louis, MO |
|
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes |
Apr 13, 2015 |
Kaushik Biswas, Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridg, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA, Ramin Abhari, Renewable Energy Group Synthetic Fuels, LLC (formerly Syntroleum), Tulsa, OK, USA |
|
The Importance of Translating an OPR to BOD |
Apr 13, 2015 |
Andrew Smith, Senior Associate, WSP, Paul Totten, Vice President, WSP |
|
Introducing the BEST 4 Conference on Behalf of the Technical Committee |
Apr 13, 2015 |
Mark Bomberg, D. Sc. (Eng) , Techn. D, PE |
|
The Bullitt Center Experience: Modeling and Measuring Net Zero Energy |
Apr 13, 2015 |
Marc Brune, PE, PAE Consulting Engineers, Portland, OR, Justin Stenkamp, PE, PAE Consulting Engineers, Seattle WA |
|
Case Study: Passive House Construction in Kansas City |
Apr 13, 2015 |
David Hawkins, Prairie Design build, David Schleicher, Prairie Design Build |
|
Thermal and Hygrothermal Performance of Ventilated Attics With and Without Breathable Underlayments |
Apr 13, 2015 |
Sudhir Railkar, Ph.D. GAF, Adem Chich, GAF, Ming Shiaio, Ph.D., GAF, Andre Desjarlais, ORNL, William Miller, Ph.D. , ORNL |
|
Performance Testing for QA and Commissioning |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
|
Keeping Energy Confined and Making Information Flow: The Smart Building of Tomorrow |
Apr 13, 2015 |
Christian Hoepfner, PhD, Director, Fraunhofer Center for Sustainable Energy Systems |
|
The Bullitt Center Experience: The Light Dynamic -- Measured Performance of Lighting and Daylight |
Apr 13, 2015 |
Christopher Meek, University of Washington, Seattle, Michael Gilbride, University of Washington, Seattle, Heli Ojaama, University of Washington, Seattle, Weston Norwood, University of Washington, Seattle |
|
North American Way For Passive House-Based Near Zero Energy Buildings |
Apr 13, 2015 |
Katrin Klingenberg, Passive Solar House Institute-US |
|
The Role of High-Complexity Low-Resolution (HCLR) Performance Modeling in the Development of Dynamic Building Envelopes |
Apr 13, 2015 |
TIm Frank, Assistant Professor, Department of Architecture, SPSU , Chip Clark, Research Assistant Professor, School of Architecture + Design, Virginia Tech |
|
Performance Testing for Quality Assurance and Commissioning |
Apr 13, 2015 |
Fiona Aldous, principal, WJE |
|
Restoring Airtightness and Weather-Resistance to Window and Curtain Wall Systems |
Apr 13, 2015 |
Ed Retzbach, CSI, CDT, LEED AP BD+C |
|
The Bullitt Center Experience: Building Enclosure Design in an Integrated High Performance Building |
Apr 13, 2015 |
Jim Hanford, AIA, LEED AP BD+C. The Miller Hull Partnership, Seattle, WA |
|
Production Homebuilder + Passive House: Lessons Learned |
Apr 13, 2015 |
Anastasia Herk, IBACOS, Pittsburgh, PA, Duncan Prahl, IBACOS, Pittsburgh, PA |
|
Risk of Condensation and Mold Growth in Wood-Frame Wall Systems with Different Exterior Insulations |
Apr 13, 2015 |
Hamed H. Saber, Construction Portfolio, National Research Council of Canada, Wahid Maref, Construction Portfolio, National Research Council of Canada |
