|
Glare Study of Highly Reflective Cool Roofing Membrane |
Jul 01, 2015 |
Joe Fong, RA, NCARB, LEED AP (BD+C) Walter P. Moore |
|
Integrated Systems of Buildings' Upgrade and New Constructions |
May 13, 2015 |
Mark Bomberg, adjunct professor, McMaster University, Canada and Southeast University, China, Michael Gibson, assistant professor, Department of Architecture, Kansas State University , Xing Shi, associate professor, Department of Architecture, Southeast University, China |
|
Cool Skins: Materials and Assemblies for Ventilated Building Envelopes in Warm Climates |
May 13, 2015 |
Michael D. Gibson, Assoc. AIA, LEED A.P., Dept. of Architecture, Kansas State |
|
High-Dynamic Range Imaging (HDMI) as Validation and Design Tool in Assessing Daylight Discomfort Glare |
Apr 13, 2015 |
M Susan Ubbelohde, University of California, Berkeley; Loisos + Ubbelohde Associates |
|
Form Follows Function: KieranTImberLake Architects |
Apr 13, 2015 |
David Riz, KieranTimberlake Architects |
|
Quantifying Comfort to Assist in the Window Selection Process |
Apr 13, 2015 |
Kerry Haglund, LEED AP BD +C, Executive Director, Efficient Windows Collaborative, Wyoming, MN, Jim Larsen, Director, Technology Marketing, Cardinal Glass Industries, Eden Prairie, MN |
|
Performance Validation Case Study--Federal Office Building with an Integrated Facade |
Apr 13, 2015 |
Mark Perepelitza, AIA, LEED AP BD+C, SERA Architects, Sustainability Resources Group Manager., Lisa Petterson, AIA, LEED AP BD+C, Associate Principal, SERA Architects, Sustainability Resources Gr, Kate Turpin, PE, LEED AP BD+C , Associate, SERA Architects, Integrated Design Specialist, James Riley, LEED AP BD+C, Associate, SERA Architects, Project Architect |
|
Field Monitoring of Embedded Wood Members in Insulated Masonry Walls in a Cold Climate |
Apr 13, 2015 |
Kohta Ueno, Senior Associate, Building Science Corporation, Westford, MA, Joseph W. Lstiburek, Ph.D., P.Eng., Principal, Building Science Corporation, Westford, MA |
|
Form vs Function? |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
|
Dynamic Façades: Solving the High Performance Building Challenge without Design Compromise |
Apr 13, 2015 |
Helen E Sanders, Vice President, Technical Business Development, SAGE Electrochromics, Inc., Fariba, Louis Podbelski, Vice President, Architectural Solutions, SAGE Electrochromics, Inc., Faribault, MN |
|
Potential Energy Savings with Exterior Shades in Large Offce Buildings and the Impace of Discomfort Glare |
Apr 13, 2015 |
Sabine Hoffmann, Lawrence Berkeley National Laboratory, Eleanor Lee, Lawrence Berkeley National Laboratory |
|
Thermal Performance and Energy Savings Potential of Attic Radiant Barrier Systems |
Apr 13, 2015 |
Som Shrestha, PhD, BEMP, ORNL, Andre Desjarlais, ORNL |
|
Quantifying Façade Performance: Advances in Simulation and Field Testing |
Apr 13, 2015 |
Stephen Selkowitz, Group Leader, Windows and Envelope Materials, LBNL |
|
The NFPA 285 Fire Test’s Impact On Architectural Design And Energy Performance |
Apr 13, 2015 |
Richard Keleher, AIA, Thompson & Lichter Company, Canton, MA |
|
Double Wall Framing Technique – An Example of High Performance, Sustainable Building Envelope Technology |
Apr 13, 2015 |
Jan Kosny, Fraunhofer CSE – Cambridge MA, USA, Andi Asiz, Prince Mohammad Bin Fahd University, Kingdom of Saudi Arabia, Kaushik Biswas, Oak Ridge National Laboratory, Oak Ridge, TN, USA, Nitin Shukla, Fraunhofer CSE – Cambridge MA, USA |
|
Weathered OSB Air and Water Leakage Testing |
Apr 13, 2015 |
Paul Grahovac, PROSOCO |
|
Field Thermal Performance of EIFS Using Vacuum Insulation Panels |
Apr 13, 2015 |
Ali Fallahi, Ph.D., R&D staff, Building Science Engineer, Fraunhofer CSE, Boston, MA, Jan Kosny, PhD, Fraunhofer CSE, Boston, MA, Nitin Shukla, PhD, Fraunhofer CSE, Boston, MA, Tony Fontanini, Ph.D. Candidate, Fraunhofer CSE, Boston, MA, Lawrence Carbary, FASTM, Dow Corning Corporation, Roland Serino, PE, Dryvit Systems Inc. |
|
Fire Hazards of Exterior Wall Assemblies Containing Combustible Components |
Apr 13, 2015 |
Amanda Kimball, Fire Protection Research Foundation |
|
Thermal Resistance of Enclosed Reflective Airspaces in Building Applications |
Apr 13, 2015 |
Hamed H. Saber |
|
Doing It Right the Second Time – Designing Minimally Invasive, Cost-Effective Solutions for Window Repair vs. Replacement |
Apr 13, 2015 |
David W. Boyer, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc., Lawrence, Kans, Ron Tatley, Building Envelope Analysis, LLC, Santa Rosa Beach, Florida, USA , Stacey Grund, Building Envelope Analysis, LLC, Seattle, Washington, USA Tatley-Grund, Inc., Seattle, Matthew Travis, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc. Lawrence, Kansa |
|
NFPA 285 in the Field: An Update of Local Adoption |
Apr 13, 2015 |
Keith Nelson, AIA, Intertek-ATI |
|
Importance of the Building Enclosure in Meeting Sustainable Building-Performance Goals |
Apr 13, 2015 |
H. Jay Enck |
|
State of the Art of NFPA 285 |
Apr 13, 2015 |
Brian Kuhn, Simpson Gumpertz & Heger Inc. |
|
The Effects of #4 Surface Low-E Coatings on Fenestration Condensation Resistance |
Apr 13, 2015 |
Tracy G. Rogers, Quanex Building Products, Inc |
|
Measuring Field Performance of Aerogel Insulation in a Hot, Dry Climate |
Apr 13, 2015 |
Bryan Urban, Fraunhofer Center for Sustainable Energy Systems, USA, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Anthony D. Fontanini, Iowa State University, USA , Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA |
