Enclosure Subscribe to Enclosure

Enclosure systems refer to the "skin" of the building and may include roof, walls, and ground protection from air and water penetration.

Titlesort ascending Date Author
Energy Consumption in Mid and High Rise Residential Buildings in British Columbia Apr 12, 2010 Graham Finch, MASc (RDH Building Engineering Ltd.), Eric Burnett, PhD (RDH Building Engineering Ltd.), Warren Knowles, P.Eng (RDH Building Engineering Ltd.)
Energy Codes: Challenges with Existing Buildings Apr 01, 2014 Bradley T. Carmichael, PE, Hoffmann Architects
Energy Challenges Related to Recladding Early Model Curtain Walls Apr 13, 2015 Andrew A. Dunlap, AIA, SmithGroupJJR, Building Technology Studio; Detroit, MI
Eliminating the Potential for Air and Moisture Infiltration in Stucco Facades at the Window-Wall Interface Apr 02, 2012 Peter Poirier (Tremco Building Envelope Solutions), Bill Hooper (Kawneer Company, Inc.)
Eliminating the Potential for Air and Moisture Infiltration at the Window-Wall Interface Apr 12, 2010 Peter Poirier (Tremco Inc.), Brian Stroik (Oscar Boldt Construction)
Electronically Tintable Glass: The Future of High Performance Facades is Here Apr 12, 2010 Helen Sanders, PhD (Sage Electrochromics Inc.), Lou Podbelski, AIA )Sage Electrochromics Inc.)
Electronically Tintable Glass as an Architectural Enabler Apr 02, 2012 Helen Sanders, PhD (SAGE Electrochromics, Inc.), Louis Podbelski, AIA (SAGE Electrochromics, Inc.)
Effect of Aging on Service Life of Vacuum Insulation Panels Apr 12, 2010 Erlend Wegger (Norway University of Science and Technology (NTNU)), Bjørn Petter Jelle (Norway University of Science and Technology (NTNU)), Erland Sveipe (Norway University of Science and Technology (NTNU)), Steinar Grynning (Norway University of Science and Technology (NTNU)), Ruben Baetens (Norway University of Science and Technology (NTNU)), Jan Vincent Thue (Norway University of Science and Technology (NTNU))
Early Phase Performance Modeling to Right-Size Building Enclosure Apr 13, 2015 Jillian Burgess, RA. The Facade Group, Philadelphia, PA
Dynamic Façades: Solving the High Performance Building Challenge without Design Compromise Apr 13, 2015 Helen E Sanders, Vice President, Technical Business Development, SAGE Electrochromics, Inc., Fariba, Louis Podbelski, Vice President, Architectural Solutions, SAGE Electrochromics, Inc., Faribault, MN
Dynamic Exterior Wall Systems for Solid Masonry Walls in Humidified Buildings Apr 02, 2012 Sean O'Brien, PE (Simpson Gumpertz & Heger Inc.), Vince Cammalleri, AIA (Simpson Gumpertz & Heger Inc.)
Dynamic Composite Cladding May 13, 2015 Jefferson Ellinger (University of North Carolina, Charlotte)
Durability of Water-Resistive Barriers as a Factor in Litigation Apr 16, 2018 David Nicastro, CEO, Building Diagnostics
Drainage Capabilities and Heat Loss of Different Inverted Roofs Assemblies Apr 16, 2018 Matthew Pel, B.Tech., Eng.L., Building Science Consultant and Principal, Morrison Hershfield, Derek Budde B.Sc. EIT, Building Science Consultant and Principal, Morrison Hershfield
DPR Construction Phoenix Regional Office Nov 01, 2013 Whole Building Design Guide, a program of the National Institute of Building Sciences
Double Wall Framing Technique – An Example of High Performance, Sustainable Building Envelope Technology Apr 13, 2015 Jan Kosny, Fraunhofer CSE – Cambridge MA, USA, Andi Asiz, Prince Mohammad Bin Fahd University, Kingdom of Saudi Arabia, Kaushik Biswas, Oak Ridge National Laboratory, Oak Ridge, TN, USA, Nitin Shukla, Fraunhofer CSE – Cambridge MA, USA
Doing It Right the Second Time – Designing Minimally Invasive, Cost-Effective Solutions for Window Repair vs. Replacement Apr 13, 2015 David W. Boyer, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc., Lawrence, Kans, Ron Tatley, Building Envelope Analysis, LLC, Santa Rosa Beach, Florida, USA , Stacey Grund, Building Envelope Analysis, LLC, Seattle, Washington, USA Tatley-Grund, Inc., Seattle, Matthew Travis, Building Envelope Analysis, LLC, Lawrence, Kansas, PROSOCO, Inc. Lawrence, Kansa
Docking State Office Building: Revisiting the Energy Performance of the Modern Glass Tower Jun 14, 2017 Michael D. Gibson (Kansas State University)
Digital Tools for Masonry Design and Construction Mar 27, 2013 T. Russell Gentry (Georgia Institute of Technology)
Development and Benchmarking of a New Whole Building Hygrothermal Model Apr 12, 2010 Fitsum Tariku (Institute for Research in Construction), Kumar Kumaran (Institute for Research in Construction), Paul Fazio (Concordia University)
Developing the Next Three Generations of Zero-Energy Windows Apr 12, 2010 Brandon Tinianov, PhD, PE (Serious Materials)
Developing a Flexible Healthcare Infrastructure Jan 11, 2016
Deterioration Model for Establishing an Optimal Mix of Time-Based Maint. and Condition-Based Maint. for the Enclosure System Apr 13, 2015 David Albrice, BSc., URP., ARP., PRA RDH Building Engineering Ltd., Matthew Branch, P.Eng. RDH Building Engineering Ltd.
Detection of Moisture and Water Intrusion Within Building Envelopes by Means of Infrared Thermographic Inspections Apr 01, 2008 Antonio Colantonio (Public Works and Government Services Canada)
Detailed Monitoring and Energy Model Development of an Existing Multi-Unit Residential Building in Toronto, Canada Apr 13, 2015 Marianne F. Touchie, Toronto Atmospheric Fund and University of Toronto, Toronto, ON, Kim D. Pressnail, University of Toronto, Toronto, ON

Pages