Design Issues Subscribe to Design Issues

Design Issues cover research projects that pertain to the art and science of creating and sustaining the built environment and include case studies of projects.

Title Datesort ascending Author
Graywater Wetland Treatment for a Living Building Apr 13, 2015 Phillip L. Thompson, Seattle University, Seattle, WA.
Case Study: Passive House Construction in Kansas City Apr 13, 2015 David Hawkins, Prairie Design build, David Schleicher, Prairie Design Build
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation Apr 13, 2015 Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada
The Importance of Translating an OPR to BOD Apr 13, 2015 Andrew Smith, Senior Associate, WSP, Paul Totten, Vice President, WSP
The Bullitt Center Experience: Modeling and Measuring Net Zero Energy Apr 13, 2015 Marc Brune, PE, PAE Consulting Engineers, Portland, OR, Justin Stenkamp, PE, PAE Consulting Engineers, Seattle WA
The Bullitt Center Experience: The Light Dynamic -- Measured Performance of Lighting and Daylight Apr 13, 2015 Christopher Meek, University of Washington, Seattle, Michael Gilbride, University of Washington, Seattle, Heli Ojaama, University of Washington, Seattle, Weston Norwood, University of Washington, Seattle
North American Way For Passive House-Based Near Zero Energy Buildings Apr 13, 2015 Katrin Klingenberg, Passive Solar House Institute-US
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes Apr 13, 2015 Kaushik Biswas, Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridg, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA, Ramin Abhari, Renewable Energy Group Synthetic Fuels, LLC (formerly Syntroleum), Tulsa, OK, USA
Five Not So Easy Pieces: Designing and Constructing the Passive House Enclosure Apr 13, 2015 Mike Steffen, Walsh Construction Co.
The Bullitt Center Experience: Building Enclosure Design in an Integrated High Performance Building Apr 13, 2015 Jim Hanford, AIA, LEED AP BD+C. The Miller Hull Partnership, Seattle, WA
Production Homebuilder + Passive House: Lessons Learned Apr 13, 2015 Anastasia Herk, IBACOS, Pittsburgh, PA, Duncan Prahl, IBACOS, Pittsburgh, PA
Thermal and Hygrothermal Performance of Ventilated Attics With and Without Breathable Underlayments Apr 13, 2015 Sudhir Railkar, Ph.D. GAF, Adem Chich, GAF, Ming Shiaio, Ph.D., GAF, Andre Desjarlais, ORNL, William Miller, Ph.D. , ORNL
Airflow in Mid to High-rise Multi-Unit Residential Buildings Apr 13, 2015 Lorne Ricketts, MASC, RDH Building Engineering LTD., Vancouver, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON
Early Phase Performance Modeling to Right-Size Building Enclosure Apr 13, 2015 Jillian Burgess, RA. The Facade Group, Philadelphia, PA
Challenges and Opportunities in Deep Envelope Retrofitting Apr 13, 2015 Paul Bertram, FCSI, CDT, Director: Environment, Sustainability, Government Affairs Kingspan Insul
The Role of High-Complexity Low-Resolution (HCLR) Performance Modeling in the Development of Dynamic Building Envelopes Apr 13, 2015 TIm Frank, Assistant Professor, Department of Architecture, SPSU , Chip Clark, Research Assistant Professor, School of Architecture + Design, Virginia Tech
An Old(er) Fellow’s Musings about Building Envelopes and Energy Efficiency Apr 13, 2015 Andre Desjarlais, program manager, Oak Ridge National Laboratory
High Performance Detailing Apr 13, 2015 Paul E. Totten, PE, LEED AP, Vice President, WSP, Washington, DC, Michael J. Heule, Principal, Helix Architecture + Design, Kansas City,
Field Thermal Performance of Radiant Barriers and Interior Radiation Control Coatings for Attic Retrofits Apr 13, 2015 Ali Fallahi, Ph.D., R&D staff, Building Science Engineer, Fraunhofer CSE, Boston, MA, David Yarbrough, Ph.D., P.E., President, R&D Services, Cookeville, TN, Jan Kośny, Ph.D., Building Enclosure Program Lead, Fraunhofer CSE, Boston, MA
Risk of Condensation and Mold Growth in Wood-Frame Wall Systems with Different Exterior Insulations Apr 13, 2015 Hamed H. Saber, Construction Portfolio, National Research Council of Canada, Wahid Maref, Construction Portfolio, National Research Council of Canada
HVAC and the Envelope: Towards New Rules of Thumb Apr 13, 2015 Steve Kemp, MMM Group
High-Performance Building Envelopes: Design Methods for Energy Efficient Facades Apr 13, 2015 Ajla Aksamija, PhD, LEED AP BD+C, CDT,Assistant Professor, University of Massachusetts, Amherst, MA
Experimental Synthesis of Hollow Silica Nanospheres for Application as Superinsulation in the Buildings of Tomorrow Apr 13, 2015 Bjørn Petter Jelle, SINTEF Building & Infrastructure, Department of Materials and Structures, Norway, Tao Gao, Norwegian University of Science and Technology (NTNU), Department of Architectural Design, Linn Ingunn Christie Sandberg, Norwegian University of Science and Technology (NTNU), Bente Gilbu Tilset, SINTEF Materials and Chemistry, Materials and Nanotechnology Sector, Mathieu Grandcolas, SINTEF Materials and Chemistry, Materials and Nanotechnology Sector, Arild Gustavsen, Norwegian University of Science and Technology (NTNU), Department of Architectural
Competing Performance Criteria in Renovation and Repurposing of Existing Building Exterior Enclosure Systems Apr 13, 2015 Paul G. Johnson, FAIA, NCARB SmithGroupJJR Inc., Building Technology Studio Leader
Form Follows Function: KieranTImberLake Architects Apr 13, 2015 David Riz, KieranTimberlake Architects

Pages