Design Issues Subscribe to Design Issues

Design Issues cover research projects that pertain to the art and science of creating and sustaining the built environment and include case studies of projects.

Title Datesort ascending Author
Project profile: New Orleans BioInnovation Center Apr 22, 2015 AIA Committee on the Environment (COTE)
Project profile: Sweetwater Spectrum Community Apr 22, 2015 AIA Committee on the Environment (COTE)
Project profile: Tassafaronga Village Apr 22, 2015 AIA Committee on the Environment (COTE)
Holistic Approach to Achieving Low Energy High-Rise Residential Buildings Apr 13, 2015 Christian Cianfrone, Building Energy Specialist, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Dieter Hardock, Product Manager, Schöck Bauteile GmbH, Baden-Baden, Germany
Energy Efficient Retrofit of a High-Rise Multifamily Building Apr 13, 2015 Brittany Hanam, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, Lorne Ricketts, MASc, EIT, RDH Building Engineering Ltd., Vancouver, BC, Andrew Pape-Salmon, P.Eng., MRM, RDH Building Engineering Ltd., Victoria, BC
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths Apr 13, 2015 Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA
Design Considerations for Climate Change Apr 13, 2015 Paul Totten, Vice President, WSP, Alexandra Connor, Project Associate, WSP
Re-Glazing of All Glass Curtain-Wall Buildings Apr 13, 2015 Michael Aoki-Kramer, BA, JD LEED-AP, RDH Building Sciences Inc., Graham Finch, RDH Building Engineering Ltd , Brian Hubbs, RDH Building Engineering Ltd, Ed Thiessen, RDH Building Engineering Ltd , James Higgins, RDH Building Engineering Ltd
Graywater Wetland Treatment for a Living Building Apr 13, 2015 Phillip L. Thompson, Seattle University, Seattle, WA.
A Critical Analysis of the Passive House Standard for the Climates of the United States Apr 13, 2015 Ryan M. Abendroth, Passive Energy Designs LLC, Saint Louis, MO
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation Apr 13, 2015 Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada
The Importance of Translating an OPR to BOD Apr 13, 2015 Andrew Smith, Senior Associate, WSP, Paul Totten, Vice President, WSP
The Bullitt Center Experience: Modeling and Measuring Net Zero Energy Apr 13, 2015 Marc Brune, PE, PAE Consulting Engineers, Portland, OR, Justin Stenkamp, PE, PAE Consulting Engineers, Seattle WA
Case Study: Passive House Construction in Kansas City Apr 13, 2015 David Hawkins, Prairie Design build, David Schleicher, Prairie Design Build
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes Apr 13, 2015 Kaushik Biswas, Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridg, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA, Ramin Abhari, Renewable Energy Group Synthetic Fuels, LLC (formerly Syntroleum), Tulsa, OK, USA
Five Not So Easy Pieces: Designing and Constructing the Passive House Enclosure Apr 13, 2015 Mike Steffen, Walsh Construction Co.
The Bullitt Center Experience: The Light Dynamic -- Measured Performance of Lighting and Daylight Apr 13, 2015 Christopher Meek, University of Washington, Seattle, Michael Gilbride, University of Washington, Seattle, Heli Ojaama, University of Washington, Seattle, Weston Norwood, University of Washington, Seattle
North American Way For Passive House-Based Near Zero Energy Buildings Apr 13, 2015 Katrin Klingenberg, Passive Solar House Institute-US
Thermal and Hygrothermal Performance of Ventilated Attics With and Without Breathable Underlayments Apr 13, 2015 Sudhir Railkar, Ph.D. GAF, Adem Chich, GAF, Ming Shiaio, Ph.D., GAF, Andre Desjarlais, ORNL, William Miller, Ph.D. , ORNL
Airflow in Mid to High-rise Multi-Unit Residential Buildings Apr 13, 2015 Lorne Ricketts, MASC, RDH Building Engineering LTD., Vancouver, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON
The Bullitt Center Experience: Building Enclosure Design in an Integrated High Performance Building Apr 13, 2015 Jim Hanford, AIA, LEED AP BD+C. The Miller Hull Partnership, Seattle, WA
Production Homebuilder + Passive House: Lessons Learned Apr 13, 2015 Anastasia Herk, IBACOS, Pittsburgh, PA, Duncan Prahl, IBACOS, Pittsburgh, PA
The Role of High-Complexity Low-Resolution (HCLR) Performance Modeling in the Development of Dynamic Building Envelopes Apr 13, 2015 TIm Frank, Assistant Professor, Department of Architecture, SPSU , Chip Clark, Research Assistant Professor, School of Architecture + Design, Virginia Tech
An Old(er) Fellow’s Musings about Building Envelopes and Energy Efficiency Apr 13, 2015 Andre Desjarlais, program manager, Oak Ridge National Laboratory
Early Phase Performance Modeling to Right-Size Building Enclosure Apr 13, 2015 Jillian Burgess, RA. The Facade Group, Philadelphia, PA

Pages