Practice Issues Subscribe to Practice Issues

Practice Issues cover the "how to's" as well as the tools, technologies, standards and regulations that govern the building industry.

Title Datesort ascending Author
High-Dynamic Range Imaging (HDMI) as Validation and Design Tool in Assessing Daylight Discomfort Glare Apr 13, 2015 M Susan Ubbelohde, University of California, Berkeley; Loisos + Ubbelohde Associates
Performance Testing for QA and Commissioning Apr 13, 2015 John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc.
Field Thermal Performance of EIFS Using Vacuum Insulation Panels Apr 13, 2015 Ali Fallahi, Ph.D., R&D staff, Building Science Engineer, Fraunhofer CSE, Boston, MA, Jan Kosny, PhD, Fraunhofer CSE, Boston, MA, Nitin Shukla, PhD, Fraunhofer CSE, Boston, MA, Tony Fontanini, Ph.D. Candidate, Fraunhofer CSE, Boston, MA, Lawrence Carbary, FASTM, Dow Corning Corporation, Roland Serino, PE, Dryvit Systems Inc.
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths Apr 13, 2015 Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA
Performance Testing for Quality Assurance and Commissioning Apr 13, 2015 Fiona Aldous, principal, WJE
NFPA 285 in the Field: An Update of Local Adoption Apr 13, 2015 Keith Nelson, AIA, Intertek-ATI
Importance of the Building Enclosure in Meeting Sustainable Building-Performance Goals Apr 13, 2015 H. Jay Enck
Detailed Monitoring and Energy Model Development of an Existing Multi-Unit Residential Building in Toronto, Canada Apr 13, 2015 Marianne F. Touchie, Toronto Atmospheric Fund and University of Toronto, Toronto, ON, Kim D. Pressnail, University of Toronto, Toronto, ON
Building Enclosure Commissioning Education Apr 13, 2015 Wagdy Anis, FAIA, LEED AP, Anis Building Enclosure Consulting
The Reality of Quantifying Curtain Wall Spandrel Thermal Performance: 2D, 3D and Hotbox Testing Apr 13, 2015 Neil Norris, Larry Carbary, Stanley Yee, Patrick Roppel, Phillip Ciantar
Building Enclosure Commissioning: Past, Present, and Future Apr 13, 2015 John A. Runkle, Intertek / Architectural Testing, Inc., York, PA, USA
The Role of High-Complexity Low-Resolution (HCLR) Performance Modeling in the Development of Dynamic Building Envelopes Apr 13, 2015 TIm Frank, Assistant Professor, Department of Architecture, SPSU , Chip Clark, Research Assistant Professor, School of Architecture + Design, Virginia Tech
Five Not So Easy Pieces: Designing and Constructing the Passive House Enclosure Apr 13, 2015 Mike Steffen, Walsh Construction Co.
The Future of Fenestration Rating Apr 13, 2015 William C. duPont, Syerngy Consulting
Use of Thermal Inertia for Reduction of HVAC Energy Consumption in Cooling Dominated and Mixed Climates Apr 13, 2015 Jan Kośny, Fraunhofer CSE, Boston, MA, USA, Elizabeth Kossecka, Polish Academy Sciences, Warsaw, Poland, Ali Fallahi, Fraunhofer CSE, Boston, MA, USA, David Yarbrough, R&D Services, Inc., Cookeville, TN, USA
Risk of Condensation and Mold Growth in Wood-Frame Wall Systems with Different Exterior Insulations Apr 13, 2015 Hamed H. Saber, Construction Portfolio, National Research Council of Canada, Wahid Maref, Construction Portfolio, National Research Council of Canada
Airflow in Mid to High-rise Multi-Unit Residential Buildings Apr 13, 2015 Lorne Ricketts, MASC, RDH Building Engineering LTD., Vancouver, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON
Introducing the BEST 4 Conference on Behalf of the Technical Committee Apr 13, 2015 Mark Bomberg, D. Sc. (Eng) , Techn. D, PE
Performance of Sealed Curtain Wall Spandrel Panels that Direct Deep Sunlight into Multi-Story Buildings Apr 13, 2015 Radu Postole, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Neil Norris, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Kasra Bigdeli, Mechanical Engineer, SunCentral Inc, Richmond, BC
Competing Performance Criteria in Renovation and Repurposing of Existing Building Exterior Enclosure Systems Apr 13, 2015 Paul G. Johnson, FAIA, NCARB SmithGroupJJR Inc., Building Technology Studio Leader
Practical Energy and Cost Optimization Methods for Selecting Massing, Materials, and Technologies Apr 06, 2015 Sandeep Ahuja (Georgia Institute of Technology), Patrick Chopson (Georgia Institute of Technology), John Haymaker (Georgia Institute of Technology), Godfried Augenbroe (Georgia Institute of Technology)
Scaffolding: Discourse, Disruption, and Progress in Architecture as a Cultural Production Apr 06, 2015 Leonard R. Bachman (University of Houston)
Comparative Analysis of Architectural Education Standards across the World Apr 06, 2015 Suchismita Bhattacharjee (University of Oklahoma), Shivashish Bose (Jadavpur University)
Intern Architects in the Academy: Preparing for Future Practice Apr 06, 2015 Caryn Brause (University of Massachusetts Amherst)
The Innovation Incubator: Micro-grants and a Culture of Innovation Apr 06, 2015 Leigh Christy (Perkins+Will), Diana Davis (Perkins+Will), Mark Walsh (Perkins+Will), Brian Weatherford (Perkins+Will)

Pages