|
Pressure Differences and Airtightness in Tall Buildings – Theory & Reality |
Apr 13, 2015 |
Lorne Ricketts, MASc, EIT., RDH Building Engineering Ltd., Vancouver, BC, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON |
|
Potential Energy Savings with Exterior Shades in Large Offce Buildings and the Impace of Discomfort Glare |
Apr 13, 2015 |
Sabine Hoffmann, Lawrence Berkeley National Laboratory, Eleanor Lee, Lawrence Berkeley National Laboratory |
|
Performance Validation Case Study--Federal Office Building with an Integrated Facade |
Apr 13, 2015 |
Mark Perepelitza, AIA, LEED AP BD+C, SERA Architects, Sustainability Resources Group Manager., Lisa Petterson, AIA, LEED AP BD+C, Associate Principal, SERA Architects, Sustainability Resources Gr, Kate Turpin, PE, LEED AP BD+C , Associate, SERA Architects, Integrated Design Specialist, James Riley, LEED AP BD+C, Associate, SERA Architects, Project Architect |
|
Performance Testing for Quality Assurance and Commissioning |
Apr 13, 2015 |
Fiona Aldous, principal, WJE |
|
Performance Testing for QA and Commissioning |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
|
Performance of Sealed Curtain Wall Spandrel Panels that Direct Deep Sunlight into Multi-Story Buildings |
Apr 13, 2015 |
Radu Postole, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Neil Norris, Building Science Consultant, Morrison Hershfield, Burnaby, BC, Kasra Bigdeli, Mechanical Engineer, SunCentral Inc, Richmond, BC |
|
North American Way For Passive House-Based Near Zero Energy Buildings |
Apr 13, 2015 |
Katrin Klingenberg, Passive Solar House Institute-US |
|
NFPA 285 in the Field: An Update of Local Adoption |
Apr 13, 2015 |
Keith Nelson, AIA, Intertek-ATI |
|
Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths |
Apr 13, 2015 |
Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA |
|
Measuring Field Performance of Aerogel Insulation in a Hot, Dry Climate |
Apr 13, 2015 |
Bryan Urban, Fraunhofer Center for Sustainable Energy Systems, USA, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Anthony D. Fontanini, Iowa State University, USA , Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA |
|
Inward Vapor Drives in Adhered Veneer Wall Assemblies with Continuous Exterior Insulation |
Apr 13, 2015 |
Jonathan Smegal, Building Science Laboratories, Waterloo, Ontario, Canada., Aaron Grin, Building Science Laboratories, Waterloo, Ontario, Canada |
|
Introducing the BEST 4 Conference on Behalf of the Technical Committee |
Apr 13, 2015 |
Mark Bomberg, D. Sc. (Eng) , Techn. D, PE |
|
Integrated Systems of Buildings' Upgrade and New Constructions |
May 13, 2015 |
Mark Bomberg, adjunct professor, McMaster University, Canada and Southeast University, China, Michael Gibson, assistant professor, Department of Architecture, Kansas State University , Xing Shi, associate professor, Department of Architecture, Southeast University, China |
|
Importance of the Building Enclosure in Meeting Sustainable Building-Performance Goals |
Apr 13, 2015 |
H. Jay Enck |
|
HVAC and the Envelope: Towards New Rules of Thumb |
Apr 13, 2015 |
Steve Kemp, MMM Group |
|
Holistic Approach to Achieving Low Energy High-Rise Residential Buildings |
Apr 13, 2015 |
Christian Cianfrone, Building Energy Specialist, Morrison Hershfield, Burnaby, BC, Patrick J, Roppel, Building Science Specialist, Morrison Hershfield, Burnaby, BC, Dieter Hardock, Product Manager, Schöck Bauteile GmbH, Baden-Baden, Germany |
|
History and Future of Fenestration: Where Have We Been? Where are We Heading? |
Apr 13, 2015 |
Stephen Selkowitz, Group Leader, Windows and Envelope Materials, LBNL |
|
High-Performance Building Envelopes: Design Methods for Energy Efficient Facades |
Apr 13, 2015 |
Ajla Aksamija, PhD, LEED AP BD+C, CDT,Assistant Professor, University of Massachusetts, Amherst, MA |
|
High-Dynamic Range Imaging (HDMI) as Validation and Design Tool in Assessing Daylight Discomfort Glare |
Apr 13, 2015 |
M Susan Ubbelohde, University of California, Berkeley; Loisos + Ubbelohde Associates |
|
High Performance Detailing |
Apr 13, 2015 |
Paul E. Totten, PE, LEED AP, Vice President, WSP, Washington, DC, Michael J. Heule, Principal, Helix Architecture + Design, Kansas City, |
|
Graywater Wetland Treatment for a Living Building |
Apr 13, 2015 |
Phillip L. Thompson, Seattle University, Seattle, WA. |
|
Glare Study of Highly Reflective Cool Roofing Membrane |
Jul 01, 2015 |
Joe Fong, RA, NCARB, LEED AP (BD+C) Walter P. Moore |
|
Form vs Function? |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
|
Form Follows Function: KieranTImberLake Architects |
Apr 13, 2015 |
David Riz, KieranTimberlake Architects |
|
Five Not So Easy Pieces: Designing and Constructing the Passive House Enclosure |
Apr 13, 2015 |
Mike Steffen, Walsh Construction Co. |
